Broilmaster P4, P3 owner manual Burner Stabilizing Bracket, Radiation Shield, Installing the Burner

GRILL ASSEMBLY

Burner Stabilizing Bracket

(Portable Cart Models Only)

Tip: Test the alignment of the burner stabilizing brackets before tightening the burner stabilizing bracket.

Install the burner stabilizing bracket (41) and fasten with the 10-24 x 3/4 phillips screw and 10-24 wing nut.

FIGURE 9 41

8

INSTALL THIS SIDE UP

FIGURE 8

36

Radiation Shield

Place the radiation shield (20) in the grill bottom. FIGURE 9.

20

19

FIGURE 10

Installing the Burner

Insert the burner assembly into the grill bottom with the venturi tubes facing the front of the grill. FIGURE 10.

The gas jets from the control valve will be inside the ends of the venturi tubes when properly installed.

FIGURE 11.

FIGURE 11

Air

Shutter

Venturi	Shutter Set	11
Tube
	Screw

P3, P4 Page 9