Broilmaster P3S-1, P3FBL-2, P3BLW-2, P3BLN-2 Installing Racks, Installing Char-Master Briquets

GRILL ASSEMBLY

Installing Racks

Place the briquet rack (8) or flavor screen rack (28) on the burner assembly.

Position the flavor screen (29) on to flavor screen rack (28) or the ceramic briquets (7) evenly on the briquette rack without overlap- ping.

For Smoker Shutter installation see DPA100 manual included with your P3S grill.

Set the multilevel cooking grids. See Figure 9.

Installing Char-Master Briquets

Individually place the ‘Char-Master’ briquets in a single layer evenly on your grill’s briquet rack; DO NOT dump them onto the briquet rack. A single layer of ‘Char-Master’ briquets is all that’s needed. DO NOT overlap or stack the briquets.

See Figure 9.

After properly placing the ‘Char-Master’ briquets on your grill’s briquet rack, there may be some briquets left over. Save them for future use.

Before cooking, always preheat the grill as directed by the grill’s operating instructions. Hot briquets cause better, quicker cooking and better flavor.

Cleaning

Routine preheating and routine burn-off (also called postheating) of a grill will clean the ‘Char-Master’ briquets. Periodically turn the briquets over while they are cool.

6B4

Figure 9a

75

8

17

6

30

(P3S only)

29

Figure 9b

B101362-2-0610 Page 13