SURROUND ASSEMBLY
1.Remove the surround from the shipping box and place the SBB surround into position in the constructed enclosure. See
Figure 1.
2.Secure the SBB surround to the enclosure using up to eight screws (not provided). See Figure 2.
Note: If you have a masonry structure you may need to substitute for the appropriate masonry fasteners.
Figure 1 | Figure 2 |
|
SURROUND AND GRILL ASSEMBLY
3.Slide grill head with flex gas line attached into surround. Make sure flex gas line is protruding out surround side. See Figures 3 and 4.
Figure 3
Figure 4
Page 11 |
