Brother 1300 Rolled Hem X57138-001, Foot, Machine Set-Up, Materials Needed for Sample, 2.5 to

Rolled Hem

X57138-001

Standard PQ foot. Use on the edge of fabric, such as hems of dresses or shirts, to fold the edge of the fabric in three while sewing.

Machine Set-Up:

Feed dogs up using one of the three settings based on fabric and whether the pin feed is used. Other settings are based on the needs of the project.

Materials Needed for Sample:

Lightweight synthetic

General Sewing Directions:

Foot 14

Insert needle about ¼” from corner and take two stitches. Turn the hand wheel toward you to raise the needle, raise the presser foot and pull the fabric toward you. Hold the four threads in your left hand and use the threads to guide the fabric into the foot. Lower the presser foot. Pull gently on threads in left hand while sewing the first few stitches to hold them in place. Fold over hem and continue feeding folded hem toward the curved guide of the foot as you sew.

Specific PQ Sample Directions:

Follow General Directions for your sample. If the fabric is stiff, you may find it useful to also pre-crease the fabric to get it started going into the foot.

Feed	Presser	Thread	Stitch
Dogs	Foot Dial	Tension	Length
	Lightweight	+/- 4	2.5 to 3

Brother PQ-Accessories Workbook July 2003 72