Brother 1300 Foot Very Narrow SA172, Machine Set-Up, Materials Needed for Sample, Midweight, July

Models: 1300

1 20
Download 20 pages 40.54 Kb
Page 6
Image 6
Foot 4

Foot 4

Very Narrow

SA172

Optional PQ foot for sewing on lightweight and fine fabric, sewing in very tight areas or attaching zippers

Machine Set-Up:

Feed dogs up using one of the three settings based on fabric and whether the pin feed is used. Presser foot dial, thread tension and stitch length are normally adjusted to produce a balanced stitch.

Materials Needed for Sample:

Quilting cotton, upholstery cord

General Sewing Directions:

Follow normal sewing instructions.

Specific PQ Sample Directions:

For double welting, cut fabric wider than three times width of double cord. Sample uses two-inch strip cut on

Feed

Presser

Thread

Stitch

Dogs

Foot Dial

Tension

Length

 

 

 

 

 

Midweight

+/- 4

3

straight of grain. Lay cords ½” from the edge of fabric. Fold the ½” section over the double cord, covering the full width. Fold over the entire piece, wrapping the cord completely, for a very tight fit. Sew between the cords. When through, trim off excess fabric close to stitching line. Apply cord to your project with the trimmed edge underneath.

Brother PQ-Accessories Workbook

July 2003

62

Page 6
Image 6
Brother 1300 Foot Very Narrow SA172, Machine Set-Up, Materials Needed for Sample, General Sewing Directions, Midweight