Downloading data to the P-touch

☞Although the P-touch can be connected to the computer through a USB connection, label layouts created in P-touch Editor cannot be printed directly from the application.

1Make sure that the P-touch is in Transfer mode. (For more details, refer to Entering Transfer mode on page 50.)

2• For downloading a template or database to the P-touch, start P-touch Editor 3.2. and open the template (and database) file.

•Click [Transfer Template] command on the [File] menu to convert the layout file to a P-touch template format and start up Transfer Manager.

3For a user-defined character image, point to “Programs” on the Start menu, point to “P-touch Editor 3.2”, and then click “Transfer Manager”.

4From the File List, select the data that you wish to transfer.

☞If the desired data is not listed in the File List, click “Modify Folder”. In the “Browse For Folder” dialog box that appears, select the folder containing the desired data, and then click “OK”.

5For each template or a user-defined character image that you want transferred, click “Change PF Key Mapping”, and then select the PF key where you wish to assign the data.

6Click “Start” to begin transferring the data. A dialog box appears, indicating that the data is being transferred.

7When the message “The transfer was completed successfully.” appears, click “OK”.

8On the P-touch, press oto exit Transfer mode and turn off the P-touch.

P-touch With a

(for PT-1650 only)

Using

Computer

 

 

51