Brother 1900 STYLE FUNCTION, O N, O F F, I+SHAD, NORMAL, NORMAL, EXAMPLE, To change the style setting:, To select the ON width setting:

EXAMPLE

To select the ON width setting:

1 While holding down c, press 3 once,

	and keep c held down.	W I D E
		O F F
2	While still holding down c, continue pressing
	3until ON is displayed.	W I D E
		O N
3	Release c.

STYLE FUNCTION

You can choose from nine different character styles to apply to your text.

☞Characters printed using the smaller sizes may be difficult to read if certain style settings (e.g., I+SHAD) are selected.

The following style settings are available:

NORMAL, BOLD, OUTLINE, SHADOW, ITALIC, I+BOLD (italic & bold), I+OUTL (italic & outline), I+SHAD (italic & shadow), VERT (vertical)

The default style setting is NORMAL. The style indicator at the bottom of the display shows the current style setting when any setting other than NORMAL is selected.

Refer to Reference at the end of this section for samples of the available settings.

To change the style setting:

1While holding down c, press 4 once, and keep c held down to display the current style setting.

2While still holding down c, continue pressing 4 until the desired style setting is displayed.

☞ The current style setting is shown by the style indicator at the bottom of the display.

3Release c to apply the selected style setting to the entire text.

32