Brother 1900 HORIZONTAL ALIGNMENT FUNCTION, LEFT, LEFT, RIGHT, Length, CENTER, EXAMPLE, F U L L, M A R G I N, M A R G I N H A L F, To change the tape margin setting:

To change the tape margin setting:

1While holding down c, press E once, and keep c held down to display the current tape margin setting.

2While still holding down c, continue pressing E until the desired tape margin set- ting is displayed.

3Release c to apply the selected tape margin setting to the entire text.

EXAMPLE

To select the HALF tape margin setting:

1While holding down c, press E once,

and keep c held down.

M A R G I NF U L L

2While still holding down c, continue press- ing E until HALF is displayed.

3Release c.

M A R G I N H A L F

HORIZONTAL ALIGNMENT FUNCTION

You can choose to align the text in one of three ways. In addition, if the Length function was used to set the length of the label, the text will align within the label according to the selected horizontal alignment setting.

The default setting is LEFT; however, two other settings are also available.

LEFT RIGHT

CENTER

37