Brother 1900 Tab, ROM, LINE, FULL, TAPE, Cause, LIMIT, LIMIT, FILES, Remedy, LENGTH, MEMORY, REPLACE, PROBLEM, BATTERIES

Error Message	Cause	Remedy
LENGTH	• This message appears if the text is	• Shorten the text to less than 3’
LIMIT!	longer than 3’ 3 1/3” (1 meter) when	3 1/3” (1 meter) before trying
	you try to print.	to print.
	• This message appears if the Length	• Set the label length between
	function is used to set a label	1.6” (4.0 cm) and 11.8” (30.0
	length that is less than 1.6” (4.0	cm).
	cm) or more than 11.8” (30.0 cm).
	• This message appears if the Tab	• Set the tab length so that it is
	Length function is used to set a tab	less than 11.8” (30.0 cm).
	length that is more than 11.8”
	(30.0 cm).
LINE	This message appears if the number	Reduce the number of lines or
LIMIT!	of lines in the text is greater than the	install a tape of greater width.
	maximum number of lines possible
	for the installed tape.
MEMORY	This message appears if you try to	Delete an unwanted file to make
FULL!	store a text file after the maximum	room for the new one.
	number of characters has already
	been stored in the memory.
NO	This message appears if you try to	Store a text file first.
FILES!	recall or delete a text file from the
	memory when none are stored.
NO	This message appears if you try to print	Install a tape cassette and try
TAPE!	a label or feed the tape when no tape	again.
	cassette is installed.
REPLACE	This message appears if the installed	Replace the batteries or use the
BATTERIES!	alkaline batteries are about to run	AC adaptor.
	out.
ROM	This message appears if there is a	Turn off the machine, and then
PROBLEM!	problem with the machine’s read	while holding down c and
	only memory.
		R, turn the machine back on.
		Contact your service representa-
		tive.

52