Brother 2480 OFF, OFF, OFF, OFF, PORT, PORT, PANEL, PANEL, PRINT, PRINT, PANEL, BL. LEN, ● FRAME:, IN ORDER, IN ORDER, REVERSE

●BL. LEN. (block length): * For the PORT Label Type mode: 20 to 200 mm

Default: 30 mm

* For the PANEL Label Type mode: 6 to 200 mm

Default: 30 mm

● FRAME:	* For the PORT Label Type mode:
	OFF, 1	, 2	, 3	, 4
	Default: OFF

*For the PANEL Label Type mode:

	OFF, 1		, 2		, 3		,
	4	, 5		, 6		,
	7	, 8		, 9
	Default: OFF
● PRINT (print order):	IN ORDER, REVERSE
	Default: IN ORDER

☞For these types of labels, we recommend using Strong Adhesive Tape.

☞The PRINT parameter is only available with the PANEL Label Type mode.

☞By using the Numbering function with the PANEL Label Type mode, a single label containing multiple blocks of ascending characters can easily be created, for example, to label patch panels as shown above. (For details on the Numbering function, refer to

Printing multiple copies with incremental characters on page 31.)

Label Type Modes

13