Brother 8045D Step 1

Setting Up the Machine

3Fan the stack of paper well to avoid paper

jams and misfeeds.

4Put paper in the paper tray.

Check that the paper is flat in the tray and

below the maximum paper mark.

5

Put the paper tray firmly back in the DCP and

unfold the Support flap before you use the

DCP.

1Push the lever up to unlock the scanner.

(The gray scanner lock lever is located at

the back left under side of the document

cover.)

Do not connect the Parallel or USB

cable yet.

1Make sure that the power switch is off.

Connect the AC power cord to the DCP.

2Plug the AC power c ord into an AC outle t.

Turn the power switch on.

For details on supported paper

specifications, see “Paper” in Chapter 2 of

the User’s Guide.

Up to here.

Support

Flap

4Release the Scanner

Lock

5Install the Power Cord

If Check Scan Lock appears on the LCD,

immediately release the scanner lock and

press Stop/Exit.

Scanner Lock Lever

Step 1

Contents

Main Quick Setup Guide DCP-8045D Step 1 Setting Up the Machine Step 2 Getting Started Warning Carton Components Control Panel Table of Contents Setting Up the Machine Step 2 Installing the Driver & Software For Network Interface Cable Users....................................... ...................36 Step 1 1 2 3 4 3Load Paper in the Paper Tray Setting Up the Machine Step 1 3 5 4 1 6Selecting Your Country (Not Language) Press Set Key 7 Norway Sweden Finland Select & Set Norway 1.Yes 2.No Enter Number Supplied CD-ROM MFL-Pro Suite Page Make sure that you have completed the in structions from Step 1 Setting Up 1 2 3 4 5 6 7 8 For Windows 98/98SE/Me Users Only Make sure that you followed the instructions in 1 to 8 on pages 8 - 9. 9 0 A For Windows 2000 Professional Users Only Page Page Make sure that you followed the instructions in 1 to 8 on pages 8 - 9. 9 0 A For Windows XP Users Only Page Page Make sure that you have completed th e instructions from Step 1 Setting Up 1 2 3 For Parallel Interface Cable Use rs (For Windows 98/98SE/Me/2000 Pr ofessional/XP) 5 6 7 8 For Windows 98/98SE/Me Users Only For Windows 2000 Professional Users Only C D Brother Native driver Installation E F Page O P Q R Make sure that you followed the instructions in 1 to 8 on pages 17 - 18 . For Windows XP Users Only Page Page Make sure that you followed the instructions from Step 1 Setting Up the Machine on pages 2 - 5. 1 2 3 For Windows NT Workstation Version 4.0 Users 6 7 8 9 For Windows NT Workstation Version 4.0 Users Make sure that you have completed th e instructions from Step 1 Setting Up 1 2 3 For Network Interface Cable Users (For Windows 98/98SE/Me/NT/200 0 Professional/XP) 7 8 9 0 For Network Interface Cable Users (For Windows 98/98SE/Me/NT/200 0 Professional/XP) D For Mac OS 8.6 to 9.2 9 0 A Make sure that you have completed the in structions from Step 1 Setting Up 1 For Mac OS X 10.1/10.2.1 or greater Page For Mac OS 8.6 to 9.2 0 A For Mac OS X 10.1/10.2.1 or greater Page For Administrators Network User's Guide Chapter Map (NC-9100h) 41 1 the on-screen instruction s. Installing the BRAdmin Professional Configuration Utility (Windows Users Only) Setting your IP Address, Subnet Mask and Gateway using BRAdmin Professional (Windows Users Only) Options Lower Tray Unit DIMM Memory LT-5000 Network Print/Fax S erver External Wireless P rint/Scan Server NC-9100h NC-2200w Replacement Consumables Drum Unit Toner DR-3000 TN-3030 / TN-3060 Trademarks Compilation and Publication