Brother 8045D 6Selecting Your Country (Not Language), 7, Selecting Your Language

5
Setting Up
the Machine
Windows®
USB
Windows®
Parallel
Windows
NT® 4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
For
Administrators
Norway, Sweden, Finland and Denmark only.
You must set your country so that the DCP works
correctly. (This function is not available on UK, Asia
and Oceania machine.)
1Check that the power is turned on by
plugging in the power cord an d turn the
power switch on.
Press Set.
2Press or to select the country
(NORWAY, SWEDEN, FINLAND or
DENMARK). (Make sure you set your
country, not your languag e.)
3Press Set when the LCD shows your
country.
4The LCD prompts you to make sur e of the
country again.
5If the LCD shows the correct country, press
1 to go to Step 6.
—OR—
Press 2 to go back to Step 1 to select the
country again.
6After the LCD shows Accepted for two
seconds, it shows Vennligst vent.
7After the LCD returns to the copy mode, turn
the power switch off, and then turn it on
again.
You can change LCD Language. (This function is not
available on UK, Asia and Oceania machine.)
1Press the Menu key.
2Press the key.
3Press the key.
4Press or to select your
language, and then press the Se t key.
5Press the Stop/Exit key.
6Selecting Your Country
(Not Language)
Set Country
Press Set Key
Set Country
▲Norway
Sweden
▼Finland
Select ▲▼ & Set
Set Country
Norway
1.Yes
2.No
Enter Number
Set Country
Norway
1.Yes
2.No
Accepted
If you select “NORWAY” in step 4, the LCD
shows Norwegean messages.
7 Selecting Your Language
Go to Next page to
install the driver