Brother 9840CDW - page 175

Troubleshooting
165
15
iMake sure if the new setting is added and is checked, and then click OK.
Note
After the Brother software package is installed, re-enable your Firewall.
Windows Vista™ users: 15
aClick the Start button, Control Panel, Network and Internet, Windows Firewall and click Change
settings.
bWhen the User Account Control screen appears, do the following.
Users who have administrator rights: Click Continue.
For users who do not have administrator rights: Enter the administrator password and click OK.
cMake sure that on (recommended) is selected on the General tab.
dClick the Exceptions tab.
eClick the Add port... button.
fTo add port 54925 for network scanning, enter the information below:
1. In Name: Enter any description, for example, “Brother Scanner”.
2. In Port number: Enter “54925”.
3. Make sure UDP is selected.
4. Click OK.
gClick the Add port... button.
hTo add port 54926 for network PC Fax, enter the information below:
1. In Name: Enter any description, for example, “Brother PC Fax”.
2. In Port number: - Enter “54926”.
3. Make sure UDP is selected.
4. Click OK.
iMake sure that the new setting is added and is checked, and then click Apply.
jIf you still have trouble with your network connection such as network scanning or printing, check File
and Printer Sharing box in the Exceptions tab and then click Apply.
Note
After the Brother software package is installed, re-enable your Firewall.