Configuring your machine for a wireless network
28
3
Using the SecureEasySetup™ software to configure your machine for a
wireless network 3
The SecureEasySetup™ software allows you to configure the wireless network easier than configuring it
manually. By pushing a button on the wireless router or access point, you can complete setup and secure the
wireless network. Your router or access point must also support SecureEasySetup™. See the user’s guide
for your wireless LAN router or access point for instructions on how to use the SecureEasySetup™ mode.
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset,
Reset and choose Yes to accept the change. The machine will restart automatically.
Note
Routers or access points that support SecureEasySetup™ have the SecureEasySetup™ symbol as
shown below.
aPlug the AC power cord into an AC outlet. Turn the power switch on.
bPlace the Brother machine close to the SecureEasySetup™ router or access point (less than 5m/16
feet).
cPush the SecureEasySetup™ button on your wireless router or access point. See the user’s guide for
your wireless router or access point for instructions.
dPress Menu on the control panel of the Brother machine.
ePress a or b to choose LAN.
Press OK.
fPress a or b to choose WLAN.
Press OK.
gPress a or b to choose SecurEasySetup.
Press OK.