44
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 11.
1Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the MFC
(See "Optional accessories" in Chapter 13
of the User's Guide.)
2Turn off and unplug the MFC from the AC
outlet and disconnect it from your
Macintosh® if you already connected an
interface cable.
3Turn on your Macintosh®.
4Insert the supplied CD-ROM into your
CD-ROM drive.
5Double-click the Start Here OSX icon to
install the printer driver and Remote Setup
program. If the language screen appears,
select your language.
6Click MFL-Pro Suite to install.
7Follow the on-screen instructions, and
restart your Macintosh®.
8After the DeviceSelector window appears,
connect the network interface cable to your
Macintosh® and then to the machine.
The DeviceSelector window will not appear
if you have also connected a USB interface
cable to the machine before restarting your
Macintosh® or if you are overwriting a
previously installed version of the Brother
Software. If you encounter this problem
continue with skipping steps 11 through 13
and then see the Software User's Guide
Chapter 7 for details on selecting what
machine the ControlCenter2.0 will connect
with.
9Connect the network interface cable to the
MFC, and then connect it to a free port on
your hub.
0Plug in the power cord and turn on the MFC.
For Network Interface Cable Users
For Mac OS® X 10.1/10.2.1 or greater
Step 2