5 - 15 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Packing and shipping the DCP
Whenever you transport the DCP, use the packing materials that
came with your DCP. If you do not pack t he DCP properly, you could
void your warranty.
Caution
It is important to allow t he DCP to ‘park’ the print head aft er a print
job. Listen carefully to the DCP before disconnecting it from the
power source to ensure that all mechanical noise has stopped . Not
allowing the DCP to complete this parking process may lead to print
problems and possible damage to the print head.
1
Lift the scanner cover from the right-hand side of the DCP until
it locks securely into the open position.
2
Remove all the ink cartridg es and attach the protective parts .
(See Replacing the ink car tridges on page 5-20.)
Caution
If you are not able to find the protective parts, do NOT remove the ink
cartridges before shipping. It is essential that the DCP be shipped
with either the protecti ve parts or the ink cartridges in position.
Shipping without them wi ll cause damage to your DCP and may void
your warranty.
When attaching the protective parts,
make sure they clip into place as shown in the diagram.