d Turn the green knob on the protective yellow cap clockwise until it clicks as to release the seal vacuum, then remove the cap (1).
1
e Each colour has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.
f Gently push the ink cartridge until it clicks, and then close the ink cartridge cover.
70
g The machine will automatically reset the ink dot counter.
Note
•If you replaced an ink cartridge, for example Black, the LCD may ask you to verify that it was a brand new one (Did You Change Blck?). For each new cartridge you installed, press a (Yes) to automatically reset the ink dot counter for that colour. If the ink cartridge you installed is not a brand new one, be sure to press b (No).
•If the LCD shows No Cartridge or Cannot Detect after you install the ink cartridge, check that the ink cartridges are installed correctly.
WARNING
If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned.
CAUTION
DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge.
DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin.
If ink gets on your skin or clothing immediately wash it off with soap or detergent.
If you mix the colours by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation.