d Turn the green knob on the protective yellow cap clockwise until it clicks as to release the seal vacuum, then remove the cap (1).
Troubleshooting and Routine Maintenance
f Gently push the ink cartridge until it clicks, and then close the ink cartridge cover.
1
e Each colour has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.
g The machine will automatically reset the ink dot counter.
Note
• If you replaced an ink cartridge, for | B |
example Black, the LCD may ask you to | |
verify that it was a brand new one |
|
(Did You Change Blck?). For each |
|
new cartridge you installed, press a (Yes) |
|
to automatically reset the ink dot counter |
|
for that colour. If the ink cartridge you |
|
installed is not a brand new one, be sure |
|
to press b (No). |
|
•If the LCD shows No Cartridge or Cannot Detect after you install the ink cartridge, check that the ink cartridges are installed correctly.
CAUTION
If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned.
65