Brother DCP-7010L, DCP-7025 Load document

Chapter 1

1 - 4

Load document

You can make copies and scan from the ADF

(automatic document feeder) and from the

scanner glass.

Note

ADF is not available for DCP-7010L.

Using the automatic

document feeder (ADF)

(DCP-7025 only)

The ADF can hold up to 35 pages and feeds

each sheet individually. Use standard

(80 g/m2) paper and always fan the pages

before putting them in the ADF.

■Make sure documents written with ink are

completely dry.

■Documents to be scanned must be from

147.3 to 215.9 mm wide and 147.3 to

356 mm long.

1Fan the pages well. Make sure you put

the documents face up, top edge first

in the ADF until you feel them touch the

feed roller.

2Adjust the paper guides to fit the width of

your documents.

3Unfold the ADF document output

support flap.

Improper Setup

■DO NOT use paper that is curled,

wrinkled, folded, ripped, stapled,

paper-clipped, pasted or taped.

■DO NOT use cardboard, newspaper or

fabric.

CAUTION

■DO NOT pull on the document while it

is feeding.

■Thick documents left on the scanner

glass may cause the ADF to jam.

Contents

Main If you need to call Customer Service Compilation and Publication Notice Page Safety precautions To use the machine safely Page Table of Contents 1 2 3 4 5 6 A I S Using this Guide Introduction Choosing a location Control panel overview Load document Using the automatic document feeder (ADF) (DCP-7025 only) 1 2 3 1 2 3 About paper Recommended Paper Choosing acceptable pa per Paper capacity of the paper trays How to load paper To load paper or other media in the paper tray 1 2 3 4 5 1 2 Initial Setup Setting the Paper Type 1 Getting started 2 Setting the Beeper Volume 1 2 5 3 Toner Save 1 2 3 4 Sleep Time 1 2 3 4 5 1 2 3 Printing the User Settings List 1 2 Using the machine as a copier Making a single copy 2 Making copies Using the Temporary Copy keys Enlarging or reducing the image copied 2 3 Adjusting contrast 2 3 Changing the temporary copy settings Use the Options key to quickly set the following copy settings temporarily for the next copy. Quality 2 3 5 Sorting copies using the ADF (DCP-7025 only) 2 3 4 Making N in 1 copies (Page Layout ) 2 3 4 6 7 8 Making a poster (Page Layout) 2 Changing the default copy settings Quality 1 2 3 Out of Memory message Software Features IEC 60825-1 Specification Laser Diode Disconnect device Wiring information Important Important information WARNING 5 Radio interference (220-240V Model Only) 1 2 Important safety instructions 1 2 3 4 A B C D E Troubleshooting and routine maintenance 6 - 2 Page Paper jams Paper is jammed inside the machine 1 2 3 4 5 Page Page Page 6 - 8 If you are having difficulty with your machine 6 - 9 6 - 10 6 - 11 Improving the print quality This section provides information on the following topics: 6 - 12 Cleaning the drum unit 6 - 13 6 - 14 Packing and shipping the machine 9 0 Routine maintenance Cleaning the outside of the machine 1 2 3 4 5 Cleaning the scanner glas s 1 2 3 Page Replacing the toner cartridge (TN-2000) How to replace the toner cartridge 1 2 3 Page Replacing the drum un it (DR-2000) 1 2 3 4 5 6 Machine Information Checking the Serial Number 3 1 2 A On-screen programming Menu table Menu Mode Appendix Page The factory settings are shown in Bold. A - 3 Appendix The factory settings are shown in Bold. A - 4 S Product description General Specifications Print media For transparency or label, we recommend removing printed pages fr om the output paper tray For more details, see About paper on page 1-6. immediately after they exit the machine t o avoid smudging. Copy Scanner Mac OS X scanning is supported in Mac OS X 10.2.4 or greater. Printer Interfaces (Cables are not included.) S - 5 Computer requirements Up to 12,000 pages Consumable items Toner life expectancy will vary depending upon t he type of average print job. the Brother Utility.) I Index C D E T U V