Brother DCP-7010L, DCP-7025 3, 2 3

Making copies

3 - 3

3Press or to select the

enlargement or reduction ratio you want.

Press Set.

—OR—

You can select Custom(25-400%) and

press Set.

Press or to enter an

enlargement or reduction ratio from 25%

to 400%.

Press Set.

Note

Enlargement or reduction ratio can also be

increased or decreased by holding down

or .

4Press Start.

—OR—

Press other temporary copy keys for

more settings.

Note

■Special Copy Options (2 in 1 (P),

2 in 1 (L), 4 in 1 (P), 4 in 1 (L)

or Poster(3 x 3)) are not available with

Enlarge/Reduce.

■(P) means Portrait and (L) means

Landscape.

Adjusting contrast

You can change the contrast to help an image

look sharper and more vivid.

1Load your document.

2Press Contrast.

3Press to increase the contrast.

—OR—

Press to decrease the contrast.

Press Set.

4Press Start.

—OR—

Press other temporary copy keys for

more settings.

Contrast

▼

-+

▲

Contents

Main If you need to call Customer Service Compilation and Publication Notice Page Safety precautions To use the machine safely Page Table of Contents 1 2 3 4 5 6 A I S Using this Guide Introduction Choosing a location Control panel overview Load document Using the automatic document feeder (ADF) (DCP-7025 only) 1 2 3 1 2 3 About paper Recommended Paper Choosing acceptable pa per Paper capacity of the paper trays How to load paper To load paper or other media in the paper tray 1 2 3 4 5 1 2 Initial Setup Setting the Paper Type 1 Getting started 2 Setting the Beeper Volume 1 2 5 3 Toner Save 1 2 3 4 Sleep Time 1 2 3 4 5 1 2 3 Printing the User Settings List 1 2 Using the machine as a copier Making a single copy 2 Making copies Using the Temporary Copy keys Enlarging or reducing the image copied 2 3 Adjusting contrast 2 3 Changing the temporary copy settings Use the Options key to quickly set the following copy settings temporarily for the next copy. Quality 2 3 5 Sorting copies using the ADF (DCP-7025 only) 2 3 4 Making N in 1 copies (Page Layout ) 2 3 4 6 7 8 Making a poster (Page Layout) 2 Changing the default copy settings Quality 1 2 3 Out of Memory message Software Features IEC 60825-1 Specification Laser Diode Disconnect device Wiring information Important Important information WARNING 5 Radio interference (220-240V Model Only) 1 2 Important safety instructions 1 2 3 4 A B C D E Troubleshooting and routine maintenance 6 - 2 Page Paper jams Paper is jammed inside the machine 1 2 3 4 5 Page Page Page 6 - 8 If you are having difficulty with your machine 6 - 9 6 - 10 6 - 11 Improving the print quality This section provides information on the following topics: 6 - 12 Cleaning the drum unit 6 - 13 6 - 14 Packing and shipping the machine 9 0 Routine maintenance Cleaning the outside of the machine 1 2 3 4 5 Cleaning the scanner glas s 1 2 3 Page Replacing the toner cartridge (TN-2000) How to replace the toner cartridge 1 2 3 Page Replacing the drum un it (DR-2000) 1 2 3 4 5 6 Machine Information Checking the Serial Number 3 1 2 A On-screen programming Menu table Menu Mode Appendix Page The factory settings are shown in Bold. A - 3 Appendix The factory settings are shown in Bold. A - 4 S Product description General Specifications Print media For transparency or label, we recommend removing printed pages fr om the output paper tray For more details, see About paper on page 1-6. immediately after they exit the machine t o avoid smudging. Copy Scanner Mac OS X scanning is supported in Mac OS X 10.2.4 or greater. Printer Interfaces (Cables are not included.) S - 5 Computer requirements Up to 12,000 pages Consumable items Toner life expectancy will vary depending upon t he type of average print job. the Brother Utility.) I Index C D E T U V