Making copies
29
4
If you want to choose more settings, press a
or b.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 33.)
Changing copy speed and
quality 4
You can choose the copy quality. The factory
setting is Normal.
aLoad your document.
bEnter the number of copies you want.
cPress a or b to choose Quality.
Press OK.
dPress a or b to choose Fast, Normal
or Best.
Press OK.
eIf you do not want to change additional
settings, press Mono Start or
Colour Start.
Enlarging or reducing the
image copied 4
You can choose an enlargement or reduction
ratio.
aLoad your document.
bEnter the number of copies you want.
cPress a or b to choose
Enlarge/Reduce.
Press OK.
dChoose one of the options below:
Use a or b to select the
enlargement or reduction ratio you
want. Press OK.
Use a or b to select Custom(25-
400%). Press + or - to enter an
enlargement or reduction ratio from
25% to 400%. Press OK.
eIf you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Page Layout Options are not available
with Enlarge/Reduce.
Fast Fast copy speed and lowest
amount of ink used. Use this
setting to save time (documents to
be proof read, large documents or
many copies).
Normal Recommended setting for ordinary
print outs. Good copy quality with
adequate copy speed.
Best Use this setting to copy precise
images such as photographs. The
highest resolution and slowest
speed.
50%
69% A4iA5
78%
83%
93% A4iLTR
97% LTRiA4
100%*
104% EXEiLTR
142% A5iA4
186% 10×15cmiLTR
198% 10×15cmiA4
200%
Custom(25-400%)