Printing photos from a memory card or USB Flashmemory drive
37
5
Remove Red-Eye 5
The machine detects eyes in your photos and
will remove red-eye from your photo.
Note
There are some cases when red-eye may
not be removed.
When the face is too small in the
image.
When the face is turning too far up,
down, left or right.
aMake sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
bPress a or b to choose
Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo after effect is
shown. The adjusted part is shown in
a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Note
Press a to try Remove Red-Eye again.
ePress OK and + or - repeatedly to enter
the number of copies you want.
fDo one of the following.
Press OK and change the print
settings. (See page 41.)
If you do not want to change any
settings, press Colour Start to print.
Monochrome 5
You can convert your photo to monochrome.
aMake sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
bPress a or b to choose
Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose Monochrome.
Press OK.
ePress OK and + or - repeatedly to enter
the number of copies you want.
fDo one of the following.
Press OK and change the print
settings. (See page 41.)
If you do not want to change any
settings, press Colour Start to print.