Option
63
B
Note
• There might be some SO-DIM Ms that will
not work with the machine.
• For more information, call Brother
Customer Service.
Installing extra memory B
aTurn off the machine’s power switch.
bDisconnect the interface cable from the
machine, and then unplug the power
cord from the AC power outlet.
cRemove the DIMM covers (1 and 2).
dUnpack the DIMM and hold it by its
edges.
CAUTION
To prevent damage to the machine from
static electricity, DO NOT touch the
memory chips or the board surface.
eHold the DIMM by the edges and align
the notches in the DIMM with the
protrusions in the slot. Insert the DIMM
diagonally (1), then tilt it toward the
interface board until it clicks into
place (2).
fPut the DIMM covers (2 and 1) back on.
gPlug the machine’s power cord back into
the AC power outlet first, and then
connect the interface cable.
hTurn on the machine’s power switch.
Note
To make sure that you have installed the
SO-DIMM properly, you can print the user
settings page that shows the current
memory size. (See User Settings
List on page 24.)
2
1
12
2
1