PhotoCapture Center®: Printing photos from a memory card

Adjusting Brightness, Contrast and ColorBrightness

a Press a or b to choose Brightness. Press OK.

b Press d to make a darker print or

Cropping

If your photo is too long or wide to fit the available space on your chosen layout, part of the image will automatically be cropped.

The factory setting is On. If you want to print the whole image, turn this setting to Off. When you set Cropping to Off, also set Borderless to Off. (See Borderless printing on page 14.)

press c to make a lighter print. Press OK.

c If you do not want to change additional

a Press a or b to choose Cropping. Press OK.

4

settings, press Color Start to print.

Contrast

You can choose the contrast setting. Increasing the contrast will make an image look sharper and more vivid.

a Press a or b to choose Contrast. Press OK.

b Press c to increase the contrast or press d to decrease the contrast.

Press OK.

c If you do not want to change additional settings, press Color Start to print.

b Press a or b to choose Off (or On). Press OK.

c If you do not want to change additional settings, press Color Start to print.

Cropping: On

Cropping: Off

13