Enlarging or reducing the copied image

You can choose an enlargement or reduction ratio. If you choose Fit to Page, your machine will adjust the size automatically to the paper size you set.

a Load your document.

b Enter the number of copies you want.

c Press a or b to choose Enlarge/Reduce. Press OK.

d Press a or b to choose 100%, Enlarge, Reduce, Fit to Page, Custom(25-400%).

e Do one of the following:

If you chose Enlarge or Reduce press OK and press a or b to choose the enlargement or reduction ratio you want. Press OK and go to step f.

If you chose Custom(25-400%), press OK. Press a, b, d or c to select a number, and then press OK. Repeat for each number until the percentage is complete.

Press a, b, d or c to select OK , and press OK. Go to step f.

If you chose 100% or Fit to Page, press OK. Go to step f.

Making copies

198% 4"x6"iA4

186% 4"x6"iLTR

104% EXEiLTR

100%

 

 

97%

LTRiA4

 

93%

A4iLTR

3

85%

LTRiEXE

 

83%

78%

46% LTRi4"x6"

Fit to Page

Custom(25-400%)

f If you do not want to change additional settings, press Black Start or

Color Start.

Note

•Page Layout is not available with

Enlarge/Reduce and Fit to Page.

•Fit to Page does not work properly if the document on the scanner glass is skewed by more than 3 degrees. Using the document guidelines on the left and top, place your document in the upper left hand corner, with the document face down on the scanner glass.

5