Chapter 4

Borderless printing

This feature expands the printable area to the edges of the paper. Printing time will be slightly slower.

a Press a or b to choose Borderless. Press OK.

b Press a or b to choose Off (or On). Press OK.

c If you do not want to change additional settings, press Color Start to print.

Print Date

You can print the date if it is already in the data on your photo. The date will be printed on the lower right corner. If the data doesn’t have the date information, you cannot use this function.

a Press a or b to choose Print Date. Press OK.

b Press a or b to choose On (or Off). Press OK.

c If you do not want to change additional settings, press Color Start to print.

Note

The DPOF setting on your camera must be turned off to use the Print Date feature.

Setting your changes as the new default

You can save the print settings you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press a or b to choose your new setting. Press OK.

Repeat this step for each setting you want to change.

b After changing the last setting, press

aor b to choose Set New Default. Press OK.

c Press + to choose Yes. d Press Stop/Exit.

Restoring all settings to the factory settings

You can restore the PhotoCapture settings Print Quality, Paper Type, Paper Size, Brightness, Contrast, Cropping, Borderless and Print Date, that you have changed, to the factory settings.

a Press a or b to choose Factory Reset. Press OK.

b Press + to choose Yes.

c Press Stop/Exit.

14