![UTILITY STITCHES](/images/new-backgrounds/200586/20058667x1.webp)
UTILITY STITCHES
3 |
UTILITY STITCHES
OVERCASTING STITCHES
You can use the overcasting stitches to join together seams and finish them in one operation. They are also useful for sewing stretch materials.
Stitch Name
Zigzag stitch
zag stitch
Overcasting
stitch
Pattern | Presser Foot | 70 stitches model |
| J | 04 |
| J | 05 |
| G | 06 |
| G | 07 |
| J | 08 |
|
|
|
Pattern No. |
|
| Stitch Width | Stitch Length | NeedleTwin | FootWalking | Reverse/ Reinforcement Stitching | ||||
stitches40 model |
| [mm (inch.)] | [mm (inch.)] | ||||||||
stitches60 model | stitches50 model |
| |||||||||
|
|
|
|
|
|
|
| ||||
|
|
| Application |
|
|
|
|
|
|
|
|
|
|
| Auto | Manual | Auto | Manual |
|
|
|
| |
|
|
|
|
|
|
|
| ||||
|
|
| Overcasting and attach- | 3.5 | 1.4 | Yes | *** |
| * | ||
04 | 04 | 04 | ing appliqués | (1/8) | (1/16) | ( J ) | Yes | Rev. | |||
|
|
| Overcasting on medium |
|
|
|
|
|
|
|
|
05 | 05 | 05 | weight or stretch fabrics, | 5.0 | 1.0 | Yes | No | Rfc.** | |||
|
|
| attaching elastic, darn- | (3/16) | (1/16) | ( J ) |
|
|
| ||
|
|
| ing, etc. |
|
|
|
|
|
|
|
|
06 | 06 | 06 | Overcasting on thin or | 3.5 | 2.0 | No | No | Rfc. | ** | ||
medium weight fabrics | (1/8) | (1/16) |
| ||||||||
07 | 07 | 07 | Overcasting on thick fab- | 5.0 | 2.5 | No | No | Rfc. | ** | ||
rics | (3/16) | (3/32) |
| ||||||||
08 | 08 | 08 | Overcasting on stretch | 5.0 | 2.5 | Yes | No | Rfc.** | |||
|
|
| fabrics | (3/16) | (3/32) | ( J ) |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
*Rev.: Reverse | **Rfc.: Reinforcement | ***Do not use reverse stitching. |
aAttach overcasting foot “G” or zigzag foot “J”.
bSelect a stitch.
•For details, refer to “Selecting stitching” (page 27).
cPosition the fabric with the edge of the fabric against the guide of the presser foot, and then lower the presser foot lever.
aGuide
dSew with the edge of the fabric against the presser foot guide.
1
aNeedle drop point
CAUTION
●After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.
32