Free-motion quilting
With
aRemoveholder. the presser foot and the presser foot
•For details, refer to “Removing the presser foot holder” (page 25).
bAlign the quilting foot with the
The pin on the quilting foot should be positioned over the needle clamp screw.
aPin on quilting foot
bPresser foot holder screw
cNeedle clamp screw
cHold the quilting foot in place with your right hand, and then tighten the presser foot holder screw using the screwdriver in your left hand.
aPresser foot holder screw
CAUTION
●Be sure to securely tighten the screws with the screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break.
dSlide the feed dog position lever, located at the
rear of the machine on the base, to (to the right as seen from the front of the machine).
3
aFeed dog position lever
(as seen from the rear of the machine)
XThe feed dogs are lowered.
eTurnstitch.on the sewing machine, and then select a
fUse both hands to hold the fabric taut, then move the fabric to follow the pattern. Reinforcement stitches are sewn at the beginning and end of sewing.
aPattern
gAfter sewing is finished, slide the feed dog
position lever to (to the left as seen from the front of the machine) to raise the feed dogs.
•Normally, the feed dog position lever is
positioned at .
45