Brother FAX-1575mc Quick Reference Card, Sending Faxes, Setup Auto Dial Numbers, Receiving Faxes, Dialing Options, Storing One-TouchDial Numbers, Message Center (FAX-1575mcOnly)

Quick Reference Card

For complete instructions about all the features and operations of your fax machine, be sure to read your Owner's Manual.

Sending Faxes 8 Enter the fax number.

Setup Auto Dial Numbers

Storing One-Touch Dial Numbers

1	Press Menu/Set, 6, 1.
2	Press the One Touch key where you want to store
	the number.
3	Enter a number (up to 20 digits),
	and then press Menu/Set.

3When the name is displayed, lift the handset for a voice call.

—OR—PressSpeaker phone (FAX-1575mc).

4Press Fax Start to begin dialing.

Message Center (FAX-1575mc Only)

Recording OGM

AutomaticTransmission

9 Press Fax Start.

4 Enter a name (up to 15 characters),

and then press Menu/Set.

1 Press Menu/Set, 8, 3.

1 Place the original face down in the ADF.

2 Press to reach MSG CTR OGM?,

2Enter the fax number using the dial pad, One Touch, Speed Dial or Search.

3Press Fax Start.

Memory Transmission

1Place the original face down in the ADF.

2Press Quick-Scan/Reports. The LCD indicates how much memory is available.

3Enter the fax number.

4Press Fax Start.

Sending a Cover Page

1Place the original face down in the ADF.

2Press Menu/Set, 3, 1.3When NEXT FAX ONLY? appears, press

Menu/Set.

4Press or to select ON (or OFF), and then press

Menu/Set.

5Press or to select a comment, and then press

Menu/Set.

6Enter two digits to indicate the number of pages being sent, and then press Menu/Set.

7Press 1 to select additional settings—OR— Press 2 if you are ready to fax.

Receiving Faxes

Select Receive Mode

Press Receive Mode to select MANUAL, FAX ONLY, FAX/ TEL, TAD:ANSWER MACH. (FAX-1270e), or MSG CTR (FAX-1575mc). If you select FAX/ TEL, make sure you set the Ring Delay and F/T Ring Time.

Turning ON Message Center Mode

(FAX-1575mc Only)

See Chapter 9 of the Owner’s Manual.

1Turn Message Storage ON.2Record the Outgoing Message (MSG CTR OGM).3Press until it lights.

Manual Reception

1Pick up the handset.2Press Fax Start if you hear fax tones (beeps).

3When the LCD shows RECEIVE, replace the handset.

Easy Receive

1Press Menu/Set, 2, 3.2Press or to select ON, OFF or SEMI.

3Press Menu/Set.

4Press Stop/Exit.

5	Press or to select FAX, TEL, FAX/TEL or
	CHAIN, and then press Menu/Set.
6	Press Stop/Exit.

Storing Speed Dial Numbers

1Press Menu/Set, 6, 2.

2Enter a two-digit speed dial number, and then press Menu/Set.

3Enter a number (up to 20 digits), and then press Menu/Set.

4Enter a name (up to 15 characters), and then press Menu/Set.

5Press or to select FAX, TEL, FAX/ TEL or CHAIN, and then press Menu/Set.

6Press Stop/Exit.

Dialing Options

One-Touch Dialing / Speed Dialing

1Pick up the handset—OR—Press Hook (FAX- 1270e) or Speaker Phone (FAX-1575mc).

2When you hear a dial tone, press the One Touch key of the location you want to call—OR— Press Search/Speed Dial, press #, and

then press the two-digit Speed Dial number.

•If you pressed Hook (FAX-1270e)to dial, pick up the handset when the other party answers.

3To hang up, replace the handset—OR—PressSpeaker Phone (FAX-1575mc).

	or
	and then press Menu/Set.
3	Press or to select RECORD OGM?,
	and then press Menu/Set,
4	Pick up the handset to record a message.
5	Replace the handset.

Playing a Voice Message1Press Play/Record.

2Use (RWD) to repeat a message. Use # (FWD) to skip a message.

3Press Stop/Exit.Printing a Fax Message

1Press Play/Record.

2After voice messages have played, press 1.Erasing MessagesTo erase voice messages individually

1Press Play/Record.

2Press Erase after the two short beeps or while the message is playing.

3Press 1.4Press Stop/Exit.To erase messages all at once

1	Press	Erase.
2	Press	or to select VOICE, FAX, or MSG,

Brother fax-back system:		Brother Accessories and Supplies:
In USA only:	1-800-521-2846	In USA:	1-888-879-3232	(voice)
Brother Global Web Site:			1-800-947-1445	(fax)
http://www.brother.com		http://www.brothermall.com
Frequently Asked Questions (FAQs) and Product Support:		In Canada: 1-877-BROTHER (voice)
http://solutions.brother.com

Searching the Auto Dial Numbers

1Press Search/Speed Dial, and then enter the first letter of the name you’re looking for.

2Press or to search the memory.

	and then press Menu/Set.
3	Press 1.
4	Press Stop/Exit.