Reliable i500B, I500A TECHNICAL DATA Full aluminium-plated heating element at 800W

CAUTION

•Never leave the steamer unattended when it's plugged in. Always pull the plug out before you fill it with water.

•Never remove the tank locking cap while the steamer is running and always check, before removing it, that no steam is coming out of the gun.

•The tank-locking cap must be replaced with original spare parts. DO NOT TIGHTEN THE CAP TOO MUCH AS IT WILL CAUSE THE PLASTIC TO CRACK. MAKE SURE IT IS "SNUG".

•The use of normal tap water is recommended for the i500. In order to clean the steam generator and remove mineral content, rinse it internally (every 15-20 Liters of water used or every month) with tap water.

•The guarantee does not cover mineral damages due to not rinsing the steam generator.

•Service: If you need to have your i500 serviced, please contact only authorized technical assistance centers (for further information please call 800-268-1649 or visit our web site at www.reliablecorporation.com).

IMPORTANT

When you are finished using the steamer for the day, unscrew the fill cap one-turn on the unit to release the steam/air from the tank. This will eliminate the vacuum that may cause damage to the pressure gauge.

TECHNICAL DATA

Full aluminium-plated heating element at 800W –120V

Boiler power i500: 1000W

Working pressure i500: 3,5 bar

Tank nominal capacity of model i500: 2,5 Litres