Brother FAX-2440C setup guide Setting Up the Machine, Parts, Installing the Handset, Loading Paper

Setting Up the Machine

1	Removing the Protective
	Parts

1Remove the protective tape and paper.

2Installing the Handset

1Connect the curled handset cord to the handset.

3Loading Paper

You can load up to 100 sheets of 20 lb paper. For more details, see “About paper” in Chapter 1 of the User’s Guide.

1Pull the paper tray completely out of the machine and remove the output paper tray.

2Press and slide the paper guide to fit the paper width.

Paper Side Guide

3Pull out the paper support and unfold the paper support flap.

Paper Support

Paper Support Flap

Use the paper support flap for Letter, Legal and A4 size paper.

4Fan the stack of paper well to avoid paper jams and mis-feeds.

5Gently insert the paper into the paper tray print side down and top edge first.

Check that the paper is flat in the tray and below the maximum paper mark.

■Make sure the paper side guides touch the side of the paper.

■Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause paper feed problems.

6Put the output paper tray back on and push the paper tray firmly back into the machine.

4