Brother operation manual Connecting to the Printer, Installing the External Fax Modem

OPERATION MANUAL

CONNECTING TO THE PRINTER

Installing the External Fax Modem

Caution

You may have to purchase a gender changer to connect the RS-232C cable connected between the External Fax Modem and the serial interface on the printer, as both connectors are female.

HL-2060/HL-2400 Series/HL-3400N series

Follow the steps below to connect the External Fax Modem to your printer.

1.Turn on the printer.

2.Press the SEL switch on the control panel to set the printer off-line.

3.Press the SEL switch again while holding down the SHIFT switch. ‘HIDDEN PANEL’ is displayed on the LED.

1.Press the s or t switch until ‘EXT. FAX MODEM’ is displayed, then press the SET switch.

2.Select ‘FAX MODEM=ON’ by pressing the SET switch. (Default setting is OFF.)

3.Turn off the printer.

4.Connect the External Fax Modem to the printer referring to the figure on the next page.

HL-2460

Follow the steps below to connect the External Fax Model to your printer

1.Press the ‘+’ to until ‘INTERFACE MODE’ is displayed on the printer front panel, and then press the ‘SET’ button.

2.At the INTERFACE menu, press the ‘+’ or ‘-‘ keys until ‘RS-232C’ is displayed, then press the ‘SET’ button.

3.Press the ‘set’ button when ‘FAX MODE’ is displayed on the printer front panel and you will see: ‘FAX MODE=OFF’, press the ‘+’ or ‘-‘ keys until ‘FAX MODE=ON’ is displayed and press the ‘SET’ button.

4.Press the ‘SET’ button to restart the printer.

5.Connect the External Fax Modem to the printer referring to the figure on the next page.

Caution

When setting “FAX MODEM=ON and the FAX MODE=OFF (HL-2460 only)”, the RS- 232C (serial) interface is used only for the fax function. The printer cannot receive normal print data via the serial interface. If you want to use the RS-232C interface for sending print data, set “FAX MODEM=OFF” and the FAX MODE=OFF (HL-2460 only).

-4-