Settings on the Control Panel, Ring Delay

OPERATION MANUAL

Settings on the Control Panel

You can change some of the FAX settings on the printer control panel.

1.Press the SEL switch to make the printer off-line.

2.Press the MODE switch to enter the Mode Menu. Then, ‘INTERFACE MODE’ is displayed.

3.Press the SET switch until ‘ADVANCED MODE’ is displayed.

4.Press the SET switch.

5.Press the SET switch until ‘FAX MODE’ is displayed.

6.Press the SET switch.

1.Press the ‘+’ to until ‘INTERFACE MODE’ is displayed on the printer front panel, and then press the ‘SET’ button.

2.At the INTERFACE menu, press the ‘+’ or ‘-‘ keys until ‘RS-232C’ is displayed, then press the ‘SET’ button.

3.Press the ‘+’ or ‘-‘ keys to scroll through the different options. Press the SET button to select a setting and then change.

Menu	Descriptions
RING DELAY	Number of rings before the printer answers when receiving fax data.
	Select from 0 to 4. The factory default setting is 2.

REDUCTION	Set if the received fax data is reduced for printing or not.
	AUTO: reduced automatically (factory default setting)
	OFF: not reduced automatically
	90%: reduced to 90%

FAX RAM	Set the RAM size used for the fax function.
SIZE	After turning the printer off and on the setting is active.
	The factory setting is 1MB.
	The maximum size that can be set is 15 MB, this depends on the
	memory size installed into the printer.
RECEIVE	Select if the printer is to receive fax data or not.
	When the printer only sends Fax data, select this to OFF.
	ON: Receive fax data (factory default setting)
	OFF: Does not receive fax data

INTERVAL	Set the interval to print a fax sent / received report. The factory
	setting is OFF.
	Select one of the following 7 types.
	OFF: No printing
	6H: every 6 hours, 12H: every 12 hours, 24H: every 24 hours
	2D: every 2 days, 4D: every 4 days, 7D: every 7 days

-6-