2
Notes
Need
Photo 4
Photo 5
Photo 6
Photo 7
Photo 8
Brother HL-1240 Drum Unit Technical Instructions
Step 4
Using a swab and alcohol clean the corona wire.
Step 5
Remove the two screws holding the cleaning brush.
(See Photo 4)
Step 6
With a small Phillips screwdriver remove the screw holding the contact plate to the cleaning brush contact.
(See Photo 5)
Step 7
When removing the cleaning brush, the contact plate may stay inside the drum unit. Remove the contact plate and clean.
(See Photo 6)
Step 8
Carefully clean the drum cleaning brush using dry compressed air or a vacuum.
Step 9
Reinstall the contact plate onto the cleaning brush.
(See Photo 7)
Step 10
Remove the “C”clip from the drum axle on the non gear side.
(See Photo 8)
