Pioneer PDA-5003, PDA-5004 and PHASE manual adjust, Adjusting screen POSITION, CLOCK

PICTURE/SCREEN Adjustment

3Use the 5/∞ buttons to select [AUTO SET UP

MODE].
MENU			INPUT1
PICTURE	SCREEN	SETUP	OPTION
LANGUAGE			: ENGLISH
ENERGY SAVE			: STANDARD
SCREEN MGT.			: OFF
ORBITER			: OFF
MASK CONTROL			: ON
AUTO SET UP MODE			: INACTIVE
AUTO FUNCTION			: OFF
AUDIO OUT			: FIXED
	CHANGE		EXIT

1Press the MENU button to display the menu

screen.
MENU				INPUT1
PICTURE	SCREEN		SETUP	OPTION
CONTRAST		:	0
BRIGHTNESS		:	0
COLOR		:	0
TINT		:	0
SHARPNESS		:	0
PICTURE RESET
SET	ENTER		MENU	EXIT

English

4 Press the SET button to activate the setting.			2 Use the 2/3 buttons to select [SCREEN].
The factory default setting is [INACTIVE].
Each time the button is pressed, the setting alternates				MENU			INPUT1
				PICTURE SCREEN		SETUP	OPTION
as follows:
	3 INACTIVE
				POSITION	:	0 /	0
		ACTIVE 2		CLOCK	:	0
				PHASE	:	0
5 When finished with the setting, press the MENU				SCREEN RESET

button to return to the normal screen image.

Notes

÷This setting is supported only when a computer signal is connected to INPUT1 or INPUT5.

÷Optimum settings may not be possible for low-luminance and

certain other signals. In such cases, set the [AUTO SETUP			ENTER			EXIT
MODE] to [INACTIVE], and use the manual adjustment
methods explained in the following section, “Adjusting	INPUT2, 3 or 4 is selected, the following screen will
screen POSITION, CLOCK, and PHASE <manual adjust>“.	appear and the [POSITION] adjustment only can be
	selected.
Adjusting screen POSITION, CLOCK,
		MENU				INPUT2
		PICTURE SCREEN			SETUP OPTION
and PHASE <manual adjust>
		POSITION		:	0 / 0
		SCREEN RESET

This setting can be adjusted when a computer signal is connected to INPUT1, INPUT2, or INPUT5.

		ENTER	EXIT
MENU	3 Use the 5/∞ buttons to select the adjustment
	item, then press the SET button.

PICTURE/SCREEN Adjustment

5/∞

2/3

SET

MENU 2/3

SET

5/∞

MENU				INPUT1
PICTURE SCREEN		SETUP		OPTION
POSITION	:	0	/	0
CLOCK	:	0
PHASE	:	0

SCREEN RESET

Display operating	Remote control unit	EXIT
panel	ENTER

29

En