Pioneer PDA-5003, PDA-5004 About operations in this manual, Picture adjustment

Before Proceeding

About operations in this manual

Each operation is described in its proper operating order. These Operating Instructions will refer to the operating controls found on the remote control unit, with the exception of those buttons found only on the main plasma display itself. When the plasma display controls include equivalent buttons to those found on the remote control unit, the commands can be performed on the main unit as well.

The following illustrations are an example of the actual operations used for the section “PICTURE adjustment”. The examples are provided to allow you to confirm whether the operation is performed correctly or not.

Note

The screen images depicted in these Operating Instructions should be considered typical images; some difference will be seen in practice, depending on the screen item displayed and its contents, the input source and various other control settings.

English

PICTURE/SCREEN Adjustment

4Press the SET button.

PICTURE adjustment Pressing the SET button writes the value into the

memory and returns the display to the step 2 screen.

	5	When the setup is finished, press the MENU	English
		button to exit the menu screen.
	Note
	Make these adjustments for each input (INPUT1 to INPUT5) and
MENU	signals.
5/∞	[PICTURE] mode adjustment items
	Below are brief descriptions of the options that can be set
	in the [PICTURE] mode.

2/3				MENU	CONTRAST ············· Adjust according to the surrounding
				2/3
					brightness so that the picture can be
SET
				SET	seen clearly.
					BRIGHTNESS ·········· Adjust so that the dark parts of the
				5/∞
					picture can be seen clearly.
					COLOR ···················· Adjust to the desired depth (Setting
Display operating		Remote control unit			to a slightly deep color will create a
panel					natural looking picture).
1 Press the MENU button to display the menu					TINT ························· Adjust so that flesh tones look
					normal.
screen.
					SHARPNESS ··········· Normally set to the center position.
MENU				INPUT1	To create a softer picture, set to the
PICTURE	SCREEN		SETUP	OPTION	left of center. To create a sharper
CONTRAST		:	0		picture, set to the right of center.
BRIGHTNESS		:	0
					Note
COLOR		:	0
TINT		:	0		Consult the Operating Instructions for your Plasma Display		Adjustment
SHARPNESS		:	0
					regarding PICTURE adjustment when inputting computer signals.
PICTURE RESET
					To reset [PICTURE] mode settings to the default
item, then press the SET button.					If settings have been adjusted excessively or the picture		PICTURE/SCREEN
					on the screen no longer appears natural, it may prove
SET	ENTER		MENU	EXIT	more beneficial to reset the [PICTURE] mode to default
2 Use the 5/∞ buttons to select the adjustment					settings instead of trying to make adjustments under
					already adjusted conditions.
MENU				INPUT1	1 In step 2 in the previous procedure, use the 5/∞
					buttons to select [PICTURE RESET], then press the
PICTURE	SCREEN		SETUP	OPTION
					SET button.
CONTRAST		:	0
BRIGHTNESS		:	0
COLOR		:	0
TINT		:	0
SHARPNESS		:	0
PICTURE RESET
	ENTER			EXIT	PICTURE RESET
SET			MENU
					YES	NO

3 Use the 2/3 buttons to adjust the picture quality
	SET	SET	MENU	EXIT
as desired.

2Use the 2/3 buttons to select [YES], and press the SET button.

BRIGHTNESS		: 0		All [PICTURE] mode settings are returned to the
				factory set default.
	SET		EXIT

27

En

3

Before Proceeding

En