Pioneer PDA-5004, PDA-5003 System Settings, Setting the onscreen display language, SET button

System Settings

English

System Settings

Setting the onscreen display language

The onscreen display language has been set to English as the factory default. To change to another language, the screen setting must be changed. Follow the procedures below to change the setting.

	STANDBY/
MENU	ON
5/∞
2/3
	MENU
SET	2/3
	SET
	5/∞
Display operating	Remote control unit
panel

1Set the rear panel MAIN POWER switch to ON. The STANDBY indicator on the front panel will light red.

2Press the STANDBY/ON button to turn the power ON.

The ON indicator on the front panel will light green.

3Press the MENU button to display the menu

screen.
MENU				INPUT1
PICTURE	SCREEN		SETUP	OPTION
CONTRAST		:	0
BRIGHTNESS		:	0
COLOR		:	0
TINT		:	0
SHARPNESS		: 0
PICTURE RESET
SET	ENTER		MENU	EXIT

18

4Use the 2/3 buttons to select [OPTION].

MENU			INPUT1
PICTURE	SCREEN	SETUP	OPTION
LANGUAGE			: ENGLISH
ENERGY SAVE			: STANDARD
SCREEN MGT.			: OFF
ORBITER			: OFF
MASK CONTROL			: ON
AUTO SET UP MODE			: INACTIVE
AUTO FUNCTION			: OFF
AUDIO OUT			: FIXED
	ENTER		EXIT

5Use the 5/∞ buttons to select [LANGUAGE], then press the SET button.

L A N G UAG E : ENGLISH

6Use the 2/3SETbuttonsSET to selectMENUtheEXIT desired language.

Each time the 2/3 buttons are pressed, the language alternates between those available, in the following order:

	3 ENGLISH 2	3 FRANÇAIS 2		3	ESPAÑOL 2
3	2 3		2 3 ITALIANO 2 3 DEUTSCH 2

		L A N G UAG E		:	ENGLISH
		SET	SET		MENU	EXIT
7
	With the desired language displayed, press the

SET button.

The selected language will be set in memory, and the screen will return to that shown in step 4.

8 When settings are completed, press the MENU button to return to the normal screen image.

Note

When the onscreen display language is set to any of INPUT 1 to INPUT 5, the same display language will be set, regardless of the type of input.

En