Pioneer PDA-5004 Part Names and Functions, Connection panel, Plasma Display Section, 3 RS-232C

Part Names and Functions

English

Connection panel	OFF		ON
		POWER		AC IN

Illustration depicts PDP-504CMX/
	0	-

PDP-50MXE1/PDP-50MXE1-S model.

When installing PDA-5003

S-VIDEO

INPUT3

VIDEO

INPUT4

INPUT 3/4

AUDIO

ANALOG RGB

INPUT5

AUDIO

IN

OUT

R

L

G(ON SYNC)

B

R

HD (H/V SYNC) VD

R

L

~

! @

#

$

%

When installing PDA-5004

S-VIDEO

INPUT3

AUDIO

VIDEO

INPUT4

AUDIO

COMPONENT

INPUT5

AUDIO

VIDEO

R

L

IN

OUT

R

L

Y

Pb/Cb

Pr/Cr

R

L

^

&

* (

)

_

+

SPEAKER		L
+	–
8Ω ~16Ω

=

Functions

R	SPEAKER		IN	OUT	ANALOG RGB IN	ANALOG RGB OUT INPUT1			INPUT2	OUTPUT
					D-Sub	D-Sub	AUDIO	DIGITAL RGB	AUDIO	AUDIO
	8Ω ~16Ω
	+	–						DVI-D

	COMBINATION	RS-232C
1	2	3	4	5	6	7	89

Part Names and

Plasma Display Section

The plasma display is provided with 2 video input connectors, 1 video output connector, audio input/output jacks and speaker terminals.

When this video card is installed on a plasma display, an additional three sets of video input connectors are provided (total five), together with one additional video output connector (total two). See the pages noted in parentheses ( ) or the plasma display’s Operating Instructions for details regarding connections to the various jacks and connectors.

1SPEAKER (R) terminal

For connection of an external right speaker. Connect a speaker whose impedance is 8 -16 Ω.

2COMBINATION IN/OUT

Never connect any component to these connectors without first consulting your Pioneer installation technician.

These connectors are used for plasma display setup adjustments.

3RS-232C

Never connect any component to this connector without first consulting your Pioneer installation technician.

This connector is used for plasma display setup adjustments.

4

4ANALOG RGB IN (INPUT1) (mini D-sub 15 pin) For connecting components equipped with RGB outputs jacks, such as a personal computer or external RGB decoder; or components equipped with component output jacks, such as a DVD recorder. Make sure that the connection made corresponds to the format of the signal output from the connected component (pages 7 to 10).

5ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin) Use the ANALOG RGB OUT (INPUT1) connector to output the video signal to an external monitor or other component.

Note: The video signal will not be output from the ANALOG RGB OUT (INPUT1) connector when the main power of this display is off or in standby mode (page 10).

6AUDIO (INPUT1) (Stereo mini jack)

Use to obtain sound when INPUT1 is selected. Connect this jack to the audio output connector of the device connected to the plasma display’s INPUT1 (page 15).

7DIGITAL RGB (INPUT2) (DVI-D jack) Use to connect a computer.

Note: This unit does not support the display of copyguard-protected video signals (page 13).

En