Pioneer PDA-5004 Automatic input switching AUTO FUNCTION, Other Operations, FUNCTION setting

Other Operations

English

Automatic input switching

(AUTO FUNCTION)

The plasma display is equipped with an [AUTO FUNCTION] detection function; when a signal is detected at the selected input, the function selector automatically switches to that input.

3Use the 5/∞ buttons to select [AUTO FUNCTION].

MENU			INPUT1
PICTURE	SCREEN	SETUP	OPTION
LANGUAGE			: ENGLISH
ENERGY SAVE			: STANDARD
SCREEN MGT.			: OFF
ORBITER			: OFF
MASK CONTROL			: ON
AUTO SET UP MODE			: INACTIVE
AUTO FUNCTION			: OFF
AUDIO OUT			: FIXED
SET	CHANGE	MENU	EXIT

Other Operations

4 Press the SET button to select the desired [AUTO

MENU		FUNCTION] setting.
		The factory default setting is [OFF].
5/∞		Each time the SET button is pressed the selector
		function switches alternately as shown:
2/3	MENU			3 OFF
	2/3		INPUT4 2		INPUT1 2

	SET			SET	÷OFF ..... [AUTO FUNCTION] is disabled.
					÷INPUT1 or INPUT4…
				5/∞
					÷ If a signal is detected to the selected
					input jack, the input function will
			Remote control unit		automatically switch to the selected
Display operating panel					input.
1 Press the MENU button to display the menu					÷ Once the function has switched to the
					selected input by operation of the [AUTO
screen.					FUNCTION] facility, if the input signal is
MENU				INPUT1	no longer detected at the selected input
PICTURE SCREEN			SETUP	OPTION	jack, the function will automatically
CONTRAST		:	0		switch back to the original input source
BRIGHTNESS		:	0		used before the [AUTO FUNCTION]
COLOR		:	0
TINT		:	0		facility was enabled.
SHARPNESS		:	0
PICTURE RESET					÷ If the input changes when the unit is in
					[AUTO FUNCTION] mode, pressing the
					INPUT button to select a different input
					will cause the [AUTO FUNCTION] mode
					to be temporarily disabled, but it can be
SET	ENTER		MENU	EXIT	enabled again by turning the power OFF/
2 Use the 2/3 buttons to select [OPTION].					ON.

MENU			INPUT1
PICTURE	SCREEN	SETUP	OPTION
LANGUAGE			: ENGLISH
ENERGY SAVE			: STANDARD
SCREEN MGT.			: OFF
ORBITER			: OFF
MASK CONTROL			: ON
AUTO SET UP MODE			: INACTIVE
AUTO FUNCTION			: OFF
AUDIO OUT			: FIXED
	ENTER		EXIT

5When finished with the setting, press the MENU button to return to the normal screen image.

Notes

÷The [AUTO FUNCTION] for [INPUT1] is supported only when a separate SYNC or Composite SYNC analog RGB signal is input ([AUTO FUNCTION] is disabled when a G ON SYNC or component video signal is input).

÷The [AUTO FUNCTION] setting affects all input sources.

40

En