Pioneer PDA-5003 manual Installation and Connections, Connection of G ON SYNC analog RGB source

		Installation and Connections
When connecting to COMPONENT VIDEO (INPUT5)		When connecting to ANALOG RGB (INPUT5)
		[Connections for PDA-5003]
COMPONENT	INPUT5
VIDEO
		ANALOG RGB	INPUT5
Y Pb/Cb Pr/Cr
		G(ON SYNC) BR	HD (H/V SYNC) VD

English

Connect the Y signal to the Y jack, the PB/CB signal to the Pb/Cb jack, and the PR/CR signal to the Pr/Cr jack.

Note

The plasma display and this Video Card are designed to support component video signals with standard, stable signal levels and sync signals. As a result, some image disruption may be generated during use of various special trick play functions on video components.

Connection of G ON SYNC analog RGB source

Make G ON SYNC connections for a component with output that has the synchronization signal layered on top of the green signal.

When connecting to ANALOG RGB IN (INPUT1)

ANALOG RGB IN	ANALOG RGB OUT	INPUT1
D-Sub	D-Sub	AUDIO

IN

On-screen setup is necessary after connection. Please see pages 18 to 20.

On-screen setup is necessary after connection.

Please see pages 18 to 20.

Note

When making G ON SYNC connections, do not make any connections to the VD or HD jacks. If connections are made, the picture may be not displayed normally.

When connecting to COMPONENT VIDEO (INPUT5)

[Connections for PDA-5004]

COMPONENT		andInstallationConnections
VIDEO		INPUT5
Y	Pb/Cb	Pr/Cr

Connect the G ON SYNC signal to the Y jack, the B signal to the Pb/Cb jack, and the R signal to the Pr/Cr jack. On-screen setup is necessary after connection.

Please see pages 18 to 20.

9

En