Chapter 3

Installation

This section explains:

SEquipment inspection

SUPS internal battery connection

SUPS setup and installation, including Extended Battery Modules (EBMs)

SRemote power-off (RPO) or remote on/off (ROO) installation

SUPS rear panels

Inspecting the Equipment

If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage.

To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of the equipment; 2) Send a copy of the damage claim within 15 days to your service representative.

NOTE Check the battery recharge date on the shipping carton label. If the date has passed and the batteries were never recharged, do not use the UPS. Contact your service representative.

EATON Powerware® 5130 Rack/Tower UPS (1250–3000 VA) User’s Guide S 164201730 Rev 2

19

www.powerware.com

 

Page 25
Image 25
Eaton Electrical 1250-3000 VA manual Chapter Installation, Inspecting the Equipment