OPERATION
Starting the UPS on Battery
NOTE Before using this feature, the UPS must have been powered by utility power at least once.
To turn on the UPS without using utility power, press and hold the 
button for two seconds. The UPS starts up in Battery mode and
supplies battery power to your equipment.
Turning the UPS Off
NOTE Pressing the 
button while the UPS is in Battery mode causes the UPS to shut down immediately.
To turn off the UPS:
1.Prepare your equipment for shutdown.
2.Press and hold the 
button for two seconds. The UPS transfers to Standby mode (if utility power is available) and removes power from your equipment.
3.Unplug the UPS.
If you do not unplug the UPS, it remains in Standby mode.
36EATON Powerware® 5130 Rack/Tower UPS
