Eaton Electrical 1250-3000 VA manual UPS Setup, Rackmount Setup

INSTALLATION

UPS Setup

The Powerware 5130 UPS is designed for flexible configurations and can be installed in a rack or as a standalone cabinet.

If you are installing the UPS in a rack, continue to the following section, “Rackmount Setup;” otherwise, continue to “Tower Setup” on page 25.

Rackmount Setup

The rail kit can be mounted in 19-inch panel (48 cm) racks from 24 to

30 inches (61 to 76 cm) deep and includes:

SLeft and right sliding rail assemblies

S(12) M5 washers

S(12) M5×12 mm Phillips®-head screws

S(8) M4×5 mm Phillips-head screws

S(2) mounting brackets with handles

Required Tools

To assemble the components, a #2 Phillips screwdriver may be needed.

EATON Powerware® 5130 Rack/Tower UPS (1250–3000 VA) User’s Guide S 164201730 Rev 2	23
www.powerware.com