INSTALLATION

5.Align each joining bracket with the adjacent cabinet screw holes and secure with the supplied screws (see Figure 7).

NOTE Joining brackets are required for installations with two or more cabinets.

Joining Bracket

Figure 7. Installing the Joining Brackets

6.If installing additional EBMs, repeat Step 5 for each cabinet.

7.Continue to the following section, “Installing the UPS.”

EATON Powerware® 5130 Rack/Tower UPS (1250–3000 VA) User’s Guide S 164201730 Rev 2

27

www.powerware.com

 

Page 33
Image 33
Eaton Electrical 1250-3000 VA manual Installing the Joining Brackets