Eaton Electrical 1250-3000 VA manual Battery Mode

OPERATION

Battery Mode

When the UPS is operating during a power outage, the alarm beeps once every 10 seconds and the button, the μ, and indicators

are on. The bar graph indicators show the level of remaining battery power.

When utility power returns, the UPS transfers to Normal mode operation while the battery recharges.

If battery capacity becomes low while in Battery mode, the alarm beeps every three seconds. Immediately complete and save your work to prevent data loss and similar difficulties.

When utility power is restored after the UPS shuts down, the UPS automatically restarts.

0-25%

26-50%

51-75%

76-100%

1

2

Figure 19. Battery Charge Level Indicators

Standby Mode

When the UPS is turned off and remains plugged into a power outlet,

the UPS is in Standby mode. The bar graph indicators are on and all other indicators are off, indicating that power is not available from the UPS output receptacles. The battery recharges when necessary.

NOTE For 230V models, the output receptacles may remain electrically live (up to 115V).

Unplug the UPS to ensure power is not available to the output receptacles.

38EATON Powerware® 5130 Rack/Tower UPS (1250–3000 VA) User’s Guide S 164201730 Rev 2 www.powerware.com