Pioneer PDA-5004, PDA-5003 manual Enlarging one part of the screen POINT ZOOM, Operation, button

Operation

English

Enlarging one part of the screen

(POINT ZOOM)

This plasma display allows enlarging of the screen image by ratios of [x 1.5], [x 2], and [x 3]. When enlarging the screen, the 5/∞/2/3 buttons can be used to move the enlarged viewing area around the screen.

¶The range of zoom possible can be confirmed by viewing the Zoom-Navi subscreen at the upper right of the main screen. The Zoom-Navi subscreen is displayed for about three seconds whenever the POINT ZOOM button, one of the 5/∞/2/3 buttons, or DISPLAY button is pressed.

2Using the 5/∞/2/3 buttons, move the screen to the desired part of the image.

x 1.5
24	R12
	22.1
			10	50
	SCROLL	P.ZOOM	ZOOM
84.3	10

DISPLAY

POINT

ZOOM

5/∞/2/3

÷Pressing the POINT ZOOM and 5/∞/2/3 buttons again will change the zoom ratio and the position of screen enlarged.

÷If the input signal changes, or if the menu screen is displayed and the input is changed, or if the multiscreen mode is selected, the POINT ZOOM function will be canceled.

Note

Be aware that when the display is used for commercial or public viewing purposes, selecting the [WIDE], [ZOOM], [CINEMA] or [FULL] mode settings may violate the rights of authors protected under copyright law.

Operation

1Press the remote control unit’s POINT ZOOM

button.
x 1.5	66.0
24		R12
		22.1
	SCROLL	P.ZOOM	ZOOM

Zoom-Navi subscreen

Each time the POINT ZOOM button is pressed, the zoom ratio alternates in the following order:

3 OFF 3 x 1.5 3 x 2 3 x 3

Note

During use of the POINT ZOOM function, the screen size cannot be changed.

24

En