Pioneer PDA-5003 Multiscreen display, To exchange the main screen and subscreen inputs, PoutP

	Operation
	3 PoutP
Multiscreen display
	The subscreen is displayed outside the right side of
	the main screen.

The plasma display’s multiscreen function allows the simultaneous display of two inputs. The multiscreen display include three modes, 2-SCREEN, PinP, and PoutP.

DISPLAY

	66.0
24	R12
	22.1
	10

English

SPLIT PIP SHIFT

SUB INPUT SWAP

1Press the remote control unit’s SPLIT button. Each time the button is pressed the multiscreen display changes in the following order:

3 2-SCREEN 3 PinP 3 PoutP 3 OFF

12-SCREEN

The main screen is displayed on the left and the subscreen on the right.

	66.0
24	R12
	22.1
	10

2PinP

The subscreen is displayed in one of the four corners of the main screen.

	66.0
24	R12
	22.1
	10

2Press the remote control unit’s SUB INPUT button to select the subscreen input source.

To exchange the main screen and subscreen inputs

Press the remote control unit’s SWAP button.

¶When 2-SCREEN mode has been selected:

The right and left sides of the display will switch; what was previously the main screen will now show the subscreen, and vice versa.

¶When PinP or PoutP has been selected:

What was previously the main screen image will now appear in reduced size as the subscreen image, and vice versa.

To change the position of the subscreen in PinP mode:

Press the remote control unit’s PIP SHIFT.

Each time the button is pressed, the position of the subscreen moves in the following order:

3 Lower right	3 Upper right
Lower left 2		Upper left 2

To display the currently selected input

Press the DISPLAY button.

If the DISPLAY button is pressed while in multiscreen mode, the main screen and sub-screen will each be displayed with its currently selected input.

Notes

¶When using the plasma display in a profit-making activity, or when exhibiting images publicly, using the screen size function to compress or stretch the image may result in infringement of the copyrights of the image owners.

¶If the multiscreen display is left on for an extended period of time, or if the same multiscreen display is repeatedly shown for short periods on an everyday basis, a residual image pattern may be burned onto the screen.

¶When selecting the 2-SCREEN mode, the screen image may appear somewhat rougher, depending on the source used.

¶The multiscreen mode will be canceled if a menu is opened, or if POINT ZOOM is performed.

¶The screen size cannot be changed during multiscreen display.

¶The sound of the input selected in the main screen is outputted when using the multiscreen function.

25

Operation

En