Pioneer PDA-5003 Energy saving settings, Energy Save, button to return to the normal screen image

Other Operations

Under factory default settings, the screen display

10 When finished with the setting, press the MENU

contents will change as follows:

button to return to the normal screen image.

Note

Set

Inverse

White mask

The [SCREEN MGT.] setting affects all input sources.

[ONCE]

image*

display

Power standby mode

[TIME TO

10 minutes

30 minutes

Screen management

ACTIVATE]

Energy saving settings

function ends here

(set in step 7).

(ENERGY SAVE)

Set

Inverse

White mask

Power

Inverse

[REPEAT]

image*

display

standby

image*

mode

The power control function allows screen brightness to

[TIME TO

10 minutes

30 minutes

10 minutes

be suppressed as a means of lowering power

ACTIVATE]

24 hours

(set in step 7).

consumption and reducing display deterioration.

This cycle repeats

* The color and brightness of the current image are displayed in inverse values. The respective RGB color output levels are inverted, with light areas appearing dark, and dark areas appearing light.

Notes	MENU
÷ When set to [ONCE], after the screen management program
ends, this part of the display will change to the [OFF]	5/∞
message. If you wish to continue the screen management
program, use the 2/3 buttons to select [ONCE] again, or		MENU
change to [REPEAT].	2/3
		2/3
÷ During screen management operation when set to [ONCE] or
[REPEAT], if the display’s MAIN POWER switch is turned OFF,
	SET	SET
the screen management program will end, and this part of the
display will change to display the message [OFF]. If you wish		5/∞
to continue the screen management program, use the 2/3
buttons to select [ONCE] or [REPEAT] again.

6Use the 5/∞ buttons to select [TIME TO ACTIVATE].

							Display operating panel			Remote control unit
				SCREEN MGT.
		STATUS		:	REPEAT		1 Press the MENU button to display the menu
		TIME TO ACTIVATE :			01H00M		screen.
		START					MENU				INPUT1
		SET	RETURN		MENU	EXIT	PICTURE SCREEN			SETUP	OPTION
							CONTRAST		:	0
7	Use the						BRIGHTNESS		:	0
		2 3					R.LEVEL		:	0
		/ buttons to set the time you wish the					G.LEVEL		:	0
	screen management program to begin.
							B.LEVEL		:	0
	When the 2/3 buttons are pressed, the screen						H.ENHANCE		:	0
									:
	management operation can be set from 0 to 24 hours,						V.ENHANCE			0
	in 10-minute units.						PICTURE RESET
8 Use the 5/∞ buttons to select [START].							2 Use the 2/3 buttons to select [OPTION].
				SCREEN MGT.			MENU				INPUT1
		STATUS		:	REPEAT		PICTURE	SCREEN		SETUP	OPTION
							LANGUAGE				: ENGLISH
		TIME TO ACTIVATE :			00H10M
							ENERGY SAVE				: STANDARD
		START					SCREEN MGT.				: OFF
							ORBITER				: OFF
		SET	SET		MENU	EXIT	MASK CONTROL				: ON
							AUTO SET UP MODE				: INACTIVE
9 Press the SET button.							AUTO FUNCTION				: OFF
							AUDIO OUT				: FIXED
The set value will be stored in memory, and the screen
will return to that shown in step 2.
The timer begins when the SET button is pressed, and
after passage of the time set in step 7, the screen
management program will begin operating.

33

English

Other Operations

En