Brother HL-4000CN - page 104

5-13
 Log Print
This is a detailed list of the processed print jobs (maximum 22). Use this list to
confirm that jobs were printed correctly.
 See
For an example of the print log, refer to 8.4.2 “Confirming the Print Log”.
5
5. .3 3. .5 5 N Ne et tw wo or rk k
Use this to make network settings.

Look
 You cannot change this setting while the printer is processing print data.
 You must restart the printer for settings to take effect. After configuring items, be
sure to restart the printer.
 Ethernet
Use this to set Ethernet communication speed and mode.
• Auto (default)
10Base-T Half, 10Base-T Full, 100Base-TX Half, or 100Base-TX Full is selected
automatically.
• 10Base/Half
• 10Base/Full
• 100Base/Half
• 100Base/Full
 TCP/IP
Use this to make TCP/IP settings. This menu contains the following:
• Setup IP Address
Select the how to obtain an IP address. Parameters are as follows:
DHCP (default)
The IP address is obtained from a DHCP server on the network.
Panel
Use this to set the IP address from the control panel.