1-6
IP Address ’192.168.1.100’
Subnet mask ’255.255.255.0’
Gateway Address ‘192.168.1.254’
Example:

Setting the IP Address

Note

The IP address consists of four separate values (base 10) separated by decimal

points. The 4 values can be set anywhere between 0 and 255.

Continued from the previous step
TCP/IP
Setup IP Address
10. Press the < > button once.
TCP/IP
IP Address
11. Press the <Form Feed/Set> or < > button once.
IP Address
000.000.000.000*
12. Using the < > or < > button, press the buttons until
the desired value (for example, 192) appears. You can
hold down the buttons to change the value in increments
of 10.
IP Address
192.000.000.000
13. Press the < > button once and move the cursor to the
next value.
IP Address
192.000.000.000
14. Repeat steps 12 and 13 to finish setting the IP address.
IP Address
192.168.001.100
15. Press the <Form Feed/Set> button once.
Reboot system
To take effect
3 seconds later, the following screen appears.
IP Address
192.168.001.100*
16. Press the <Job Cancel/Back> or < > button once.
The lower line of the screen returns to ‘IP address’.